Hydraulic Cylinder U Type 3alxes End Rear Dump Truck For Sale
Rear dump truck is a subdivision product of trailer, which is a semi-trailer that can realize self-unloading function. Compared with other trailer products, it has the advantages of easy operation, high transportation efficiency, low material surplus rate, and labor saving, so it is a very popular trailer in the logistics transportation market.
Product Introduction
Hydraulic cylinder U type 3alxes end rear dump truck for sale
Send inquiry Contact Supplier For Exclusive Services And Preferential Price.
We are factory manufacturing, welcome you to visit our factory.
The rear dump truck is mainly used for the transportation of bulk cargo. Common bulk cargoes include sand and gravel, coal, grain, etc.
Based on its own characteristics, the rear dump truck should pay attention to the following points when designing and manufacturing:
Due to the limitation of the structure, if the cargo box is too long, the center of gravity of the vehicle may be too high and unstable after lifting. If the ground is not level, accidents may occur. Therefore, according to the standard regulations, the overall length of the carriage is generally 8~10 m, the maximum outer width of the carriage is 2.55 m, the maximum inner width is 2.45 m, the maximum height of the fence is 0.6 m, and the maximum effective volume is 14.7 m³.
|
Proudct Configuration Table |
|||
|
Trailer Type |
Rear Dump Truck |
Axles Qty |
4 |
|
Rare Weight |
10000kg |
Loading Weight |
60tons |
|
Trailer Size(mm) |
13000*2550*2900 |
Carraige Size (mm) |
12900*2460*600 |
|
Wheel Base(mm) |
6600+1310+1310+1310 |
Rear Hang |
2320 |
|
Main Beam Material |
T700/AT BUYER REQUEST(SUCH AS Q235 #16) |
Main Beam Middle Plate Thickness |
5mm |
|
Main Beam Upper Plate Thickness |
8mm |
Main Beam Lower Plate Thickness |
10mm |
|
Main Beam Height |
490mm |
Plate board |
1.8mm |
|
Side Beam |
14#G Type |
Side Material |
T700/AT |
|
Axles Type |
13tons |
Axles Brand |
Fuwa/BUYER REQUEST |
|
Tire Type |
12R22.5 16PR |
Tire Brand |
Chaoyang/BUYER REQUEST |
|
Tire Qty |
16 |
Rim Type/Material |
R22.5 Steel/Aluminium Alloy |
|
Leaf Spring Type Suspension |
90mm*13mm*10/Other |
King Pin Type/Brand |
90# JOST |
|
Landing Gear Type/Brand |
28tons Jost/Other |
Lock |
No |
|
Tool Box |
2m/Aluminium Alloy |
Side Protection |
Aluminium Alloy |
|
Oil Cap |
5+1 or 6+1 |
Turnover Direction |
Left or Right |
|
Brake System |
Doul Line Brake System |
Brake Air Chamber |
Four double and Two single Brake air chamber |
|
ABS |
Kemi/WEIBOKE/AT BUYER REQUEST |
Electrical system |
1. Voltage: 24v 2. Receptacle: 7 ways (7 wire harness)Tail lamp with turn signal, brake light & reflector, side lamp etc.One set 6-core standard Cable. |
|
Packing |
Complete Chassis sand blasting to clean rust, 1 coat of anti-rust prime,2 coats of final paint |
Delivery way |
Transfer to Qingdao Port, and carry by ro-ro ship or bulk cargo ship or container, the freight cost depends on the volume,We will arrange the most cost-effective transportation mode |
Hot Tags: hydraulic cylinder u type 3alxes end rear dump truck for sale, China hydraulic cylinder u type 3alxes end rear dump truck for sale manufacturers, suppliers, trailer with tank, flatbed semi trailers, street cleaner truck, fuel tank with trailer, end dump semi trailer, cargo van for moving
You Might Also Like
Send Inquiry
